OutBack MATE Remote Monitor and Control
The OutBack MATE is a complete system controller and display for both the OutBack FX2000
inverter/charger and MX60 MPPT PV charge controller. It provides a display of the operation as well as
allows control and adjustment of the setpoints. The
OutBack Mate also coordinates the operation of the entire
system to maximize performance and to prevent multiple
products from conflicting. A single OutBack MATE is able to
connect to multiple FX2000 inverter/charges, MX60 MPPT PV
charge controllers and any other OutBack power conversion and
control products offered in the future. A maximum of ten
OutBack products can be connected to a single MATE via CAT5
ethernet type cabling with 8 wire RJ45 modular connectors and
the OutBack HUB Communication Manager.
The OutBack MATE includes a 4 line backlit LCD display with
80 alphanumeric characters. This allows multiple measurements to
be displayed at the same time and reduces the amount of abbrevia-
tions required, simplifying the operation and reducing confusion. All
of the programmed setpoints are stored in permanent memory to
eliminate the need to reprogram the system after a shutdown or bat-
tery replacement. The OutBack MATE also includes a built-in real time clock and calendar which allows pro-
gramming of the inverter operation based on the time of day and even day of the week. This can be used to
allow the system to work with time-of-day power rates or to limit a generator's run time to a specific time
period of the day or week. The OutBack MATE also includes an opto-isolated RS232 port with a DB9 jack for
connection to the serial port of a PC computer.
MATE System Control - Shipped with a 50ft CAT 5 cable 30.4180 $295
HUB-4
Communications Manager - Allows the MATE to control up to four FX2000 inverters or MX60
Charge Controls or a combination of the 2
30.4185 $195
HUB-10
Communications Manager - Allows the MATE to control up to ten FX2000 inverters or MX60
Charge Controls or a combination of the 2
30.4188 $375
Outback
Model
Item
Code
Price
Outback Mater System Conitor and Control
Outback FX Inverter Accessories
Use these accessories to connect the inverter to an Outback Power Center, or to connect it to conduit. A
Stacking Kit is required to connect more than one inverter to the same load.
FX-DCC
Aluminum cover for DC connections on top of inverter 30.4160 $65
FX-DCA
Aluminum 2" conduit adapter - required to mount an FX2000 to a PSDC 30.4163 $45
FX-ACA
AC wiring compartment extension and 2" conduit adapter - includes two 1"
conduit knockouts and an AC outlet knockout
30.4166 $35
FX-A
Accessory Kit - Includes FX-DCC, FX-DCA and FX-ACA 30.4169 $129
STACK-2
Stacking kit for two FX2000 inverters - includes cables 30.4182 $85
STACK-4
Stacking kit for four FX2000 inverters - includes cables 30.4183 $125
RTS
Remote Temperature Sensor with 20' cable 30.4190 $29
Outback
Model
Item
Code
PriceOutback FX Inverter Accessories
(19 pages)
(19 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals